6.5 Enzymes

Learning Objectives

Learning Objectives

In this section, you will explore the following questions:

  • What is the role of enzymes in metabolic pathways?
  • How do enzymes function as molecular catalysts?

Connection for AP® Courses

Connection for AP® Courses

Many chemical reactions in cells occur spontaneously, but happen too slowly to meet the needs of a cell. For example, a teaspoon of sucrose or table sugar, a disaccharide, in a glass of iced tea will take time to break down into two monosaccharides, glucose and fructose; however, if you add a small amount of the enzyme sucrase to the tea, sucrose breaks down almost immediately. Sucrase is an example of an enzyme, a type of biological catalyst. Enzymes are macromolecules—most often proteins—that speed up chemical reactions by lowering activation energy barriers. Enzymes are very specific for the reactions they catalyze; because they are polypeptides, enzymes can have a variety of shapes attributed to interactions among amino acid R-groups. One part of the enzyme, the active site, interacts with the substrate via the induced fit model of interaction. Substrate binding alters the shape of the enzyme to facilitate the chemical reaction in several different ways, including bringing substrates together in an optimal orientation. After the reaction finishes, the product(s) are released, and the active site returns to its original shape.

Enzyme activity, and thus the rate of an enzyme-catalyzed reaction, is regulated by environmental conditions, including the amount of substrate, temperature, pH, and the presence of coenzymes, cofactors, activators, and inhibitors. Inhibitors, coenzymes, and cofactors can act competitively by binding to the enzyme’s active site, or noncompetitively by binding to the enzyme’s allosteric site. An allosteric site is an alternate part of the enzyme that can bind to non–substrate molecules. Enzymes work most efficiently under optimal conditions that are specific to the enzyme. For example, trypsin, an enzyme in the human small intestine, works most efficiently at pH 8, whereas pepsin in the stomach works best under acidic conditions. Sometimes environmental factors, especially low pH and high temperatures, alter the shape of the active site; if the shape cannot be restored, the enzyme denatures. The most common method of enzyme regulation in metabolic pathways is via feedback inhibition.

How can various factors, such as feedback inhibition, regulate enzyme activity?

Information presented and the examples highlighted in the section support concepts and Learning Objectives outlined in Big Idea 4 of the AP® Biology Curriculum Framework. The learning objectives listed in the Curriculum Framework provide a transparent foundation for the AP® Biology course, an inquiry-based laboratory experience, instructional activities, and AP® Exam questions. A Learning Objective merges required content with one or more of the seven science practices.

Big Idea 4 Biological systems interact, and these systems and their interactions possess complex properties.
Enduring Understanding 4.B Competition and cooperation are important aspects of biological systems.
Essential Knowledge 4.B.1 Interactions between molecules affect their structure and function.
Science Practice 5.1 The student can analyze data to identify patterns or relationships.
Learning Objective 4.17 The student is able to analyze data to identify how molecular interactions affect structure and function.

The Science Practices Assessment Ancillary contains additional test questions for this section that will help you prepare for the AP® exam. These questions address the following standards:

  • [APLO 2.15]
  • [APLO 4.8]
  • [APLO 2.16]

A substance that helps a chemical reaction to occur is a catalyst, and the special molecules that catalyze biochemical reactions are called enzymes. Almost all enzymes are proteins, made up of chains of amino acids, and they perform the critical task of lowering the activation energies of chemical reactions inside the cell. Enzymes do this by binding to the reactant molecules, and holding them in such a way as to make the chemical bond-breaking and bond-forming processes take place more readily. It is important to remember that enzymes don’t change the ∆G of a reaction. In other words, they don’t change whether a reaction is exergonic (spontaneous) or endergonic. This is because they don’t change the free energy of the reactants or products. They only reduce the activation energy required to reach the transition state (Figure 6.15).

This plot shows that a catalyst decreases the activation energy for a reaction but does not change the Gibbs free energy.
Figure 6.15 Enzymes lower the activation energy of the reaction but do not change the free energy of the reaction.

Enzyme Active Site and Substrate Specificity

Enzyme Active Site and Substrate Specificity

The chemical reactants to which an enzyme binds are the enzyme’s substrates. There may be one or more substrates, depending on the particular chemical reaction. In some reactions, a single-reactant substrate is broken down into multiple products. In others, two substrates may come together to create one larger molecule. Two reactants might also enter a reaction, both become modified, and leave the reaction as two products. The location within the enzyme where the substrate binds is called the enzyme’s active site. The active site is where the action happens, so to speak. Since enzymes are proteins, there is a unique combination of amino acid residues—also called side chains, or R groups—within the active site. Each residue is characterized by different properties. Residues can be large or small, weakly acidic or basic, hydrophilic or hydrophobic, positively or negatively charged, or neutral. The unique combination of amino acid residues, their positions, sequences, structures, and properties, creates a very specific chemical environment within the active site. This specific environment is suited to bind, albeit briefly, to a specific chemical substrate or substrates. Due to this jigsaw puzzle-like match between an enzyme and its substrates—which adapts to find the best fit between the transition state and the active site—enzymes are known for their specificity. The best fit results from the shape and the amino acid functional group’s attraction to the substrate. There is a specifically matched enzyme for each substrate and, thus, for each chemical reaction; however, there is flexibility as well.

The fact that active sites are so perfectly suited to provide specific environmental conditions also means that they are subject to influences by the local environment. It is true that increasing the environmental temperature generally increases reaction rates, enzyme-catalyzed or otherwise. However, increasing or decreasing the temperature outside of an optimal range can affect chemical bonds within the active site in such a way that they are less well suited to bind substrates. High temperatures will eventually cause enzymes, like other biological molecules, to denature, a process that changes the natural properties of a substance. Likewise, the pH of the local environment can also affect enzyme function. Active site amino acid residues have their own acidic or basic properties that are optimal for catalysis. These residues are sensitive to changes in pH that can impair the way substrate molecules bind. Enzymes are suited to function best within a certain pH range, and, as with temperature, extreme pH values—acidic or basic—of the environment can cause enzymes to denature.

Induced Fit and Enzyme Function

For many years, scientists thought that enzyme-substrate binding took place in a simple lock-and-key fashion. This model asserted that the enzyme and substrate fit together perfectly in one instantaneous step. However, current research supports a more refined view called induced fit (Figure 6.16). The induced-fit model expands upon the lock-and-key model by describing a more dynamic interaction between enzyme and substrate. As the enzyme and substrate come together, their interaction causes a mild shift in the enzyme’s structure that confirms an ideal binding arrangement between the enzyme and the transition state of the substrate. This ideal binding maximizes the enzyme’s ability to catalyze its reaction.

Link to Learning

QR Code representing a URL

View an animation of induced fit at this website.

Phosphofructokinase deficiency occurs when a person lacks an enzyme needed to perform glycolysis in skeletal muscles. What effect could this have on the body?

  1. Production of energy by glycolysis will occur, skeletal muscles will function properly
  2. Production of energy by glycolysis will not occur, skeletal muscles will function properly
  3. Production of energy by glycolysis will occur, skeletal muscles will not function properly
  4. Production of energy by glycolysis will not occur, skeletal muscles will not function properly

When an enzyme binds its substrate, an enzyme-substrate complex is formed. This complex lowers the activation energy of the reaction and promotes its rapid progression in one of many ways. On a basic level, enzymes promote chemical reactions that involve more than one substrate by bringing the substrates together in an optimal orientation. The appropriate region, atoms and bonds, of one molecule is juxtaposed to the appropriate region of the other molecule with which it must react. Another way in which enzymes promote the reaction of their substrates is by creating an optimal environment within the active site for the reaction to occur. Certain chemical reactions might proceed best in a slightly acidic or non-polar environment. The chemical properties that emerge from the particular arrangement of amino acid residues within an active site create the perfect environment for an enzyme’s specific substrates to react.

You’ve learned that the activation energy required for many reactions includes the energy involved in manipulating or slightly contorting chemical bonds so that they can easily break and allow others to reform. Enzymatic action can aid this process. The enzyme-substrate complex can lower the activation energy by contorting substrate molecules in such a way as to facilitate bond-breaking, helping to reach the transition state. Finally, enzymes can also lower activation energies by taking part in the chemical reaction itself. The amino acid residues can provide certain ions or chemical groups that actually form covalent bonds with substrate molecules as a necessary step of the reaction process. In these cases, it is important to remember that the enzyme will always return to its original state at the completion of the reaction. One of the hallmark properties of enzymes is that they remain ultimately unchanged by the reactions they catalyze. After an enzyme is done catalyzing a reaction, it releases its product(s).

In this diagram, a substrate binds the active site of an enzyme and, in the process, both the shape of the enzyme and the shape of the substrate change. The substrate is converted to products that then leave the enzyme’s active site.
Figure 6.16 According to the induced-fit model, both enzyme and substrate undergo dynamic conformational changes upon binding. The enzyme contorts the substrate into its transition state, thereby increasing the rate of the reaction.

Science Practice Connection for AP® Courses

Think About It

AP® Biology Investigation 13: Enzyme Activity. This investigation allows you to design and conduct experiments to explore the effects of environmental variables, such as temperature and pH, on the rates of enzymatic reactions.

Control of Metabolism Through Enzyme Regulation

Control of Metabolism Through Enzyme Regulation

It would seem ideal to have a scenario in which all of the enzymes encoded in an organism’s genome existed in abundant supply and functioned optimally under all cellular conditions, in all cells, at all times. In reality, this is far from the case. A variety of mechanisms ensure that this does not happen. Cellular needs and conditions vary from cell to cell, and change within individual cells over time. The required enzymes and energetic demands of stomach cells are different from those of fat storage cells, skin cells, blood cells, and nerve cells. Furthermore, a digestive cell works much harder to process and break down nutrients during the time that closely follows a meal compared with many hours after a meal. As these cellular demands and conditions vary, so do the amounts and functionality of different enzymes.

Since the rates of biochemical reactions are controlled by activation energy, and enzymes lower and determine activation energies for chemical reactions, the relative amounts and functioning of the variety of enzymes within a cell ultimately determine which reactions will proceed and at which rates. This determination is tightly controlled. In certain cellular environments, enzyme activity is partly controlled by environmental factors, like pH and temperature. There are other mechanisms through which cells control the activity of enzymes and determine the rates at which various biochemical reactions will occur.

Regulation of Enzymes by Molecules

Enzymes can be regulated in ways that either promote or reduce their activity. There are many different kinds of molecules that inhibit or promote enzyme function, and various mechanisms exist for doing so. In some cases of enzyme inhibition, for example, an inhibitor molecule is similar enough to a substrate that it can bind to the active site and simply block the substrate from binding. When this happens, the enzyme is inhibited through competitive inhibition, because an inhibitor molecule competes with the substrate for active site binding (Figure 6.17). On the other hand, in noncompetitive inhibition, an inhibitor molecule binds to the enzyme in a location other than an allosteric site and still manages to block substrate binding to the active site.

This plot shows rate of reaction versus substrate concentration for an enzyme in the absence of inhibitor, and for enzyme in the presence of competitive and noncompetitive inhibitors. Both competitive and noncompetitive inhibitors slow the rate of reaction, but competitive inhibitors can be overcome by high concentrations of substrate, whereas noncompetitive inhibitors cannot.
Figure 6.17 Competitive and noncompetitive inhibition affect the rate of reaction differently. Competitive inhibitors affect the initial rate but do not affect the maximal rate, whereas noncompetitive inhibitors affect the maximal rate.

Some inhibitor molecules bind to enzymes in a location where their binding induces a conformational change that reduces the affinity of the enzyme for its substrate. This type of inhibition is called allosteric inhibition (Figure 6.18). Most allosterically regulated enzymes are made up of more than one polypeptide, meaning that they have more than one protein subunit. When an allosteric inhibitor binds to an enzyme, all active sites on the protein subunits are changed slightly such that they bind their substrates with less efficiency. There are allosteric activators as well as inhibitors. Allosteric activators bind to locations on an enzyme away from the active site, inducing a conformational change that increases the affinity of the enzyme’s active site(s) for its substrate(s).

The left part of this diagram shows allosteric inhibition. The allosteric inhibitor binds to the enzyme at a site other than the active site. The shape of the active site is altered so that the enzyme can no longer bind to its substrate. The right part of this diagram shows allosteric activation. The allosteric activator binds to the enzyme at a site other than the active site. The shape of the active site is changed, allowing substrate to bind at a higher affinity.
Figure 6.18 Allosteric inhibitors modify the active site of the enzyme so that substrate binding is reduced or prevented. In contrast, allosteric activators modify the active site of the enzyme so that the affinity for the substrate increases.

Everyday Connection

Drug Discovery by Looking for Inhibitors of Key Enzymes in Specific Pathways

This photo shows several red capsule pills.
Figure 6.19 Have you ever wondered how pharmaceutical drugs are developed? (credit: Deborah Austin)

Enzymes are key components of metabolic pathways. Understanding how enzymes work and how they can be regulated is a key principle behind the development of many of the pharmaceutical drugs (Figure 6.19) on the market today. Biologists working in this field collaborate with other scientists, usually chemists, to design drugs.

Consider statins for example—which is the name given to the class of drugs that reduces cholesterol levels. These compounds are essentially inhibitors of the enzyme HMG-CoA reductase. HMG-CoA reductase is the enzyme that synthesizes cholesterol from lipids in the body. By inhibiting this enzyme, the levels of cholesterol synthesized in the body can be reduced. Similarly, acetaminophen is an inhibitor of the enzyme cyclooxygenase. While it is effective in providing relief from fever and inflammation (pain), its mechanism of action is still not completely understood.

How are drugs developed? One of the first challenges in drug development is identifying the specific molecule that the drug is intended to target. In the case of statins, HMG-CoA reductase is the drug target. Drug targets are identified through painstaking research in the laboratory. Identifying the target alone is not sufficient; scientists also need to know how the target acts inside the cell and which reactions go awry in the case of disease. Once the target and the pathway are identified, then the actual process of drug design begins. During this stage, chemists and biologists work together to design and synthesize molecules that can either block or activate a particular reaction. However, this is only the beginning: Both if and when a drug prototype is successful in performing its function, then it must undergo many tests from in vitro experiments to clinical trials before it can get FDA approval to be on the market.

Statins reduce the level of cholesterol in the blood. Based on the everyday connection, which of the following might also reduce cholesterol levels in the blood?
  1. a drug that increases HMG-CoA reductase levels
  2. a drug that reduces cyclooxygenase levels
  3. a drug that reduces lipid levels in the body
  4. a drug that blocks the action of acetaminophen

Many enzymes don’t work optimally, or even at all, unless bound to other specific non-protein helper molecules, either temporarily through ionic or hydrogen bonds, or permanently through stronger covalent bonds. Two types of helper molecules are cofactors and coenzymes. Binding to these molecules promotes optimal conformation and function for their respective enzymes. Cofactors are inorganic ions, such as iron (Fe++) and magnesium (Mg++). One example of an enzyme that requires a metal ion as a cofactor is the enzyme that builds DNA molecules, DNA polymerase, which requires bound zinc ion (Zn++) to function. Coenzymes are organic helper molecules, with a basic atomic structure made up of carbon and hydrogen, which are required for enzyme action. The most common sources of coenzymes are dietary vitamins (Figure 6.20). Some vitamins are precursors to coenzymes and others act directly as coenzymes. Vitamin C is a coenzyme for multiple enzymes that take part in building the important connective tissue component, collagen. An important step in the breakdown of glucose to yield energy is catalysis by a multi-enzyme complex called pyruvate dehydrogenase. Pyruvate dehydrogenase is a complex of several enzymes that actually requires one cofactor—a magnesium ion—and five different organic coenzymes to catalyze its specific chemical reaction. Therefore, enzyme function is, in part, regulated by an abundance of various cofactors and coenzymes, which are supplied primarily by the diets of most organisms.

Shown are the molecular structures for Vitamin A, folic acid, Vitamin B1, Vitamin C, Vitamin B2, Vitamin D2, Vitamin B6, and Vitamin E.
Figure 6.20 Vitamins are important coenzymes or precursors of coenzymes, and are required for enzymes to function properly. Multivitamin capsules usually contain mixtures of all the vitamins at different percentages.

Enzyme Compartmentalization

In eukaryotic cells, molecules such as enzymes are usually compartmentalized into different organelles. This allows for yet another level of regulation of enzyme activity. Enzymes required only for certain cellular processes can be housed separately along with their substrates, allowing for more efficient chemical reactions. Examples of this sort of enzyme regulation based on location and proximity include the enzymes involved in the latter stages of cellular respiration, which take place exclusively in the mitochondria, and the enzymes involved in the digestion of cellular debris and foreign materials, located within lysosomes.

Feedback Inhibition in Metabolic Pathways

Molecules can regulate enzyme function in many ways. A major question remains, however: What are these molecules and where do they come from? Some are cofactors and coenzymes, ions, and organic molecules, as you’ve learned. What other molecules in the cell provide enzymatic regulation, such as allosteric modulation, and competitive and noncompetitive inhibition? The answer is that a wide variety of molecules can perform these roles. Some of these molecules include pharmaceutical and non-pharmaceutical drugs, toxins, and poisons from the environment. Perhaps the most relevant sources of enzyme regulatory molecules, with respect to cellular metabolism, are the products of the cellular metabolic reactions themselves. In a most efficient and elegant way, cells have evolved to use the products of their own reactions for feedback inhibition of enzyme activity. Feedback inhibition involves the use of a reaction product to regulate its own further production (Figure 6.21). The cell responds to the abundance of specific products by slowing down production during anabolic or catabolic reactions. Such reaction products may inhibit the enzymes that catalyzed their production through the mechanisms described above.

This diagram shows a metabolic pathway in which three enzymes convert a substrate, in three steps, into a final product. The final product inhibits the first enzyme in the pathway.
Figure 6.21 Metabolic pathways are a series of reactions catalyzed by multiple enzymes. Feedback inhibition, where the end product of the pathway inhibits an upstream step, is an important regulatory mechanism in cells.

The production of both amino acids and nucleotides is controlled through feedback inhibition. Additionally, ATP is an allosteric regulator of some of the enzymes involved in the catabolic breakdown of sugar, the process that produces ATP. In this way, when ATP is abundant, the cell can prevent its further production. Remember that ATP is an unstable molecule that can spontaneously dissociate into ADP. If too much ATP were present in a cell, much of it would go to waste. On the other hand, ADP serves as a positive allosteric regulator—an allosteric activator—for some of the same enzymes that are inhibited by ATP. Thus, when relative levels of ADP are high compared to ATP, the cell is triggered to produce more ATP through the catabolism of sugar.

Disclaimer

This section may include links to websites that contain links to articles on unrelated topics.  See the preface for more information.