Learning Objectives
Learning Objectives
By the end of this section, you will be able do the following:
- Determine the period of oscillation of a hanging pendulum
The information presented in this section supports the following AP® learning objectives and science practices:
- 3.B.3.1 The student is able to predict which properties determine the motion of a simple harmonic oscillator and what the dependence of the motion is on those properties. (S.P. 6.4, 7.2)
- 3.B.3.2 The student is able to design a plan and collect data in order to ascertain the characteristics of the motion of a system undergoing oscillatory motion caused by a restoring force. (S.P. 4.2)
- 3.B.3.3 The student can analyze data to identify qualitative or quantitative relationships between given values and variables (i.e., force, displacement, acceleration, velocity, period of motion, frequency, spring constant, string length, mass) associated with objects in oscillatory motion to use that data to determine the value of an unknown. (S.P. 2.2, 5.1)
- 3.B.3.4 The student is able to construct a qualitative and/or a quantitative explanation of oscillatory behavior given evidence of a restoring force. (S.P. 2.2, 6.2)
Pendulums are in common usage. Some have crucial uses, such as in clocks; some are for fun, such as a child’s swing; and some are just there, such as the sinker on a fishing line. For small displacements, a pendulum is a simple harmonic oscillator. A simple pendulum is defined to have an object that has a small mass, also known as the pendulum bob, which is suspended from a light wire or string, such as shown in Figure 16.14. Exploring the simple pendulum a bit further, we can discover the conditions under which it performs simple harmonic motion, and we can derive an interesting expression for its period.
We begin by defining the displacement to be the arc length . We see from Figure 16.14 that the net force on the bob is tangent to the arc and equals . (The weight has components along the string and tangent to the arc.) Tension in the string exactly cancels the component parallel to the string. This leaves a net restoring force back toward the equilibrium position at .
Now, if we can show that the restoring force is directly proportional to the displacement, then we have a simple harmonic oscillator. In trying to determine if we have a simple harmonic oscillator, we should note that for small angles (less than about ), ( and differ by about 1 percent or less at smaller angles). Thus, for angles less than about , the restoring force is
The displacement is directly proportional to . When is expressed in radians, the arc length in a circle is related to its radius ( in this instance) by
so that
For small angles, then, the expression for the restoring force is
This expression is of the form
where the force constant is given by and the displacement is given by . For angles less than about , the restoring force is directly proportional to the displacement, and the simple pendulum is a simple harmonic oscillator.
Using this equation, we can find the period of a pendulum for amplitudes less than about . For the simple pendulum
Thus,
for the period of a simple pendulum. This result is interesting because of its simplicity. The only things that affect the period of a simple pendulum are its length and the acceleration due to gravity. The period is completely independent of other factors, such as mass. As with simple harmonic oscillators, the period for a pendulum is nearly independent of amplitude, especially if is less than about . Even simple pendulum clocks can be finely adjusted and accurate.
Note the dependence of on . If the length of a pendulum is precisely known, it can actually be used to measure the acceleration due to gravity. Consider the following example.
Example 16.6 Measuring Acceleration due to Gravity: The Period of a Pendulum
What is the acceleration due to gravity in a region where a simple pendulum having a length 75.000 cm has a period of 1.7357 s?
Strategy
We are asked to find given the period and the length of a pendulum. We can solve for , assuming only that the angle of deflection is less than .
Solution
- Square and solve for .
16.30
- Substitute known values into the new equation.
16.31
- Calculate to find .
16.32
Discussion
This method for determining can be very accurate. This is why length and period are given to five digits in this example. For the precision of the approximation to be better than the precision of the pendulum length and period, the maximum displacement angle should be kept below about
Making Career Connections
Knowing can be important in geological exploration; for example, a map of over large geographical regions aids the study of plate tectonics and helps in the search for oil fields and large mineral deposits.
Take Home Experiment: Determining g g g
Use a simple pendulum to determine the acceleration due to gravity in your own locale. Cut a piece of a string or dental floss so that it is about 1 m long. Attach a small object of high density to the end of the string (for example, a metal nut or a car key). Starting at an angle of less than allow the pendulum to swing and measure the pendulum’s period for 10 oscillations using a stopwatch. Calculate How accurate is this measurement? How might it be improved?
Check Your Understanding
An engineer builds two simple pendula. Both are suspended from small wires secured to the ceiling of a room. Each pendulum hovers 2 cm above the floor. Pendulum 1 has a bob with a mass of . Pendulum 2 has a bob with a mass of . Describe how the motion of the pendula will differ if the bobs are both displaced by .
Solution
The movement of the pendula will not differ at all because the mass of the bob has no effect on the motion of a simple pendulum. The pendula are only affected by the period (which is related to the pendulum’s length) and by the acceleration due to gravity.
PhET Explorations: Pendulum Lab
Play with one or two pendulums and discover how the period of a simple pendulum depends on the length of the string, the mass of the pendulum bob, and the amplitude of the swing. It’s easy to measure the period using the photogate timer. You can vary friction and the strength of gravity. Use the pendulum to find the value of on planet X. Notice the anharmonic behavior at large amplitude.